After this step, it is possible to note that the chamber pressure is reduced and the product GKT137831 temperature increased to −5 °C to initiate the drying process. The dew point shows the occurrence of primary drying and secondary drying (after the 1261 min data point), when the temperature of the plate rises to 25 °C, as does the temperature of the product. The samples freeze-dried in the laboratory freeze-dryer (Group A) apparently

suffered some fibers breakage in the fibrous pericardium (Fig. 2D), while samples of group B appear to be intact. Observing the serous pericardium (Fig. 2A and B), both samples showed integrity, with no sign of deformity or disruption of the tissue. Raman spectroscopy, showed in Fig. 3, revealed that the characteristic peaks related to the structure of type I collagen (Amide I, Amide III and δ-NH) were maintained in both samples [18], [20] and [22]. However, is possible to note considerable alterations on the peaks intensity for the samples freeze-dried on the laboratory freeze-dryer (Group A). The second derivative method (Savitzky–Golay) was applied to a spectral treatment in order to confirm the difference in the

intensities. This treatment see more makes an adjustment in the base line and smoothing of 21 points. According to the second derivative, the peaks responsible for the collagen triple-helix structure are stronger when freeze-drying was performed in the pilot freeze-dryer (Group B). According to the data generated by MATLAB (Table 1), when BP is freeze-dried by the laboratory freeze-dryer (Group A) Young’s Modulus (E) – reflecting the elasticity of the material – is drastically decreased. The eltoprazine E value decreases from 196.53 MPa (Group B) to 108.56 MPa (Group A). Rupture tension (σrup), which is the maximum stress that a material can withstand, was also negatively affected for group A samples, decreasing from 18.93 MPa (Group B) to 12.26 MPa (Group A). Fig. 4 shows that samples in group B have a lower degree of swelling

when compared with group A. Moreover, it is noticed that water absorption tends to stabilize faster for group B than for group A – after 4 h 30 min of testing compared to 7 h 30 min. In the micrograph (Fig. 5A) it is possible to note points where rupture of collagen fibers occurred along the tissue (black arrows) when BP was freeze-dried by the laboratory freeze-dryer (Group A). On the other hand, TEM analysis for group B showed that the tissue was better preserved, since most of collagen fibers appeared unbroken (Fig. 5B). BP is composed mainly of type I collagen. The tropocollagen triple helix structure is stabilized by the interchain hydrogen bond formation. Parallel tropocollagen molecules are covalently crosslink with each other through their aldehyde and amino groups, forming collagen fibrils. Collagen self-organizes to form bundles or a meshwork that determines the tensile strength, the elasticity and the geometry of the tissue [17].