Conclusion: Sound implant-supported choices for an atrophic maxilla must be made with a thorough understanding of its anatomic and biomechanical factors. “
“Scleroderma is an autoimmune multisystem rheumatic condition characterized by fibrosis of connective tissues of the body, resulting in hardening and impairment of the function of different organs. Deposition of collagen fibers in peri-oral tissues causes loss of elasticity and increased tissue stiffness, resulting in restricted mouth

opening. A maximal oral opening smaller than the size of a complete denture can make prosthetic treatment challenging. Patients with microstomia who must wear removable dental prostheses (RDPs) often face the difficulty

selleck screening library of being unable to insert PARP inhibitor or remove a conventional RDP. A sectional-collapsible denture is indicated for the prosthetic management of these patients, but reduced manual dexterity often makes intraoral manipulation of the prosthesis difficult. A single collapsible complete denture is a better choice for functional rehabilitation of these patients. This clinical report describes in detail the prosthodontic management of a maxillary edentulous selleck inhibitor patient with restricted mouth opening induced by scleroderma with a single collapsible removable complete denture fabricated with heat-polymerized silicone soft liner and heat-cured acrylic resin. The

preliminary and secondary impressions were made with moldable aluminum trays by using putty and light-body poly(vinyl siloxane) elastomeric impression material. The collapsed denture can be easily inserted and removed by the patient and also provides adequate function in the mouth. “
“This study aimed to investigate the influence of ceramic thickness and shade on the Knoop hardness and dynamic elastic modulus of a dual-cured resin cement. Six ceramic shades (Bleaching, A1, A2, A3, A3.5, B3) and two ceramic thicknesses (1 mm, 3 mm) were evaluated. Disk specimens (diameter: 7 mm; thickness: 2 mm) of the resin cement were light cured under a ceramic block. Light-cured specimens without the ceramic block at distances of 1 and 3 mm were also produced. The Knoop hardness number (KHN), density, and dynamic Young’s moduli were determined.